View SDC1205-1R3YF_4455881.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SMD POWER INDUCTORS
1. PART NO. EXPRESSION :
SDC1205 SERIES
SDC1205-1R3YF
(a) (b) (c) (d)(e)
(a) Series code (b) Dimension code (c) Inductance code : 1R3 = 1.3uH
(d) Tolerance code : M = 20%, Y = 30% (e) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
Clip Termination A C D
L G
220
B
E
PCB Pattern Unit:m/m A 12.00.3 B 12.00.3 C 6.0 Max. D 5.00.2 E 7.60.2 G 7.0 Ref. H 5.4 Ref. L 12.6 Ref.
3. SCHEMATIC :
4. GENERAL SPECIFICATION : a) Temp. rise : 40C Max. b) Ambient temp. : 25C c) Rated current : Base on temp. rise & L/L0A = 30% Max. d) Operating temp. : -25C to +85C e) Storage temp. : -25C to +85C
NOTE : Specifications subject to change without notice. Please check our website for latest information.
H
12.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
SMD POWER INDUCTORS
5. ELECTRICAL CHARACTERISTICS : Part No. SDC1205-1R3YF SDC1205-2R1YF SDC1205-3R1YF SDC1205-4R4YF SDC1205-5R8YF SDC1205-7R5YF SDC1205-100MF SDC1205-120MF SDC1205-150MF SDC1205-180MF SDC1205-220MF SDC1205-270MF SDC1205-330MF SDC1205-390MF SDC1205-470MF SDC1205-560MF SDC1205-680MF SDC1205-820MF SDC1205-101MF SDC1205-121MF SDC1205-151MF SDC1205-181MF SDC1205-221MF SDC1205-271MF SDC1205-331MF SDC1205-391MF SDC1205-471MF SDC1205-561MF SDC1205-681MF SDC1205-821MF SDC1205-102MF Inductance ( H ) 1.3 30% 2.1 30% 3.1 30% 4.4 30% 5.8 30% 7.5 30% 10 20% 12 20% 15 20% 18 20% 22 20% 27 20% 33 20% 39 20% 47 20% 56 20% 68 20% 82 20% 100 20% 120 20% 150 20% 180 20% 220 20% 270 20% 330 20% 390 20% 470 20% 560 20% 680 20% 820 20% 1000 20% Test Frequency ( Hz ) 1V / 7.96M 1V / 7.96M 1V / 7.96M 1V / 7.96M 1V / 7.96M 1V / 7.96M 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K 1V / 1K
SDC1205 SERIES
DCR () Max. 0.012 0.014 0.017 0.020 0.021 0.024 0.025 0.027 0.030 0.034 0.036 0.051 0.057 0.068 0.075 0.110 0.120 0.140 0.160 0.170 0.230 0.290 0.400 0.460 0.510 0.690 0.770 0.860 1.200 1.340 1.530
IDC (A) Max. 8.00 7.00 6.00 5.00 4.40 4.20 4.00 3.50 3.30 3.00 2.80 2.30 2.10 2.00 1.80 1.70 1.50 1.40 1.30 1.10 1.00 0.90 0.80 0.75 0.68 0.65 0.58 0.54 0.48 0.43 0.40
NOTE : Specifications subject to change without notice. Please check our website for latest information.
12.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
SMD POWER INDUCTORS
6. RELIABILITY AND TEST CONDITIONS :
SDC1205 SERIES
ITEM
Electrical Characteristics Test Inductance DCR Heat Rated Current (Irms)
PERFORMANCE
Refer to standard electrical characteristics list
TEST CONDITION
HP4284A, CH11025, CH3302, CH1320, CH1320S LCR meter. CH16502, Agilent33420A Micro-Ohm Meter. Irms(A) will cause the coil temperature rise approximately T=40C without core loss 1. Applied the allowed DC current 2. Temperature measured by digital surface thermometer Isat(A) will cause Lo to drop approximately 20% max.
Saturation Current (Isat) Mechanical Performance Test Solderability Test More than 90% of the terminal electrode should be covered with solder.
Preheating Dipping 230C Natural cooling
Preheat : 150C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 2305C Flux for lead free : rosin Dip Time : 41sec.
150C
60 seconds
41 seconds
Solder Heat Resistance
1. Appearance : No significant abnormality 2. Inductance change : Within 20%
Preheating 260C Dipping
Natural
cooling
Preheat : 150C, 60sec. Solder : Sn-Ag3.0-Cu0.5 Solder Temperature : 2605C Flux for lead free : rosin Dip Time : 100.5sec.
150C
60 seconds
100.5 seconds
Reliability Test High Temperature Life Test Low Temperature Life Test Thermal Shock Temperature : 855C Time : 50012 hours Measure at room temperature after placing for 2 to 3 hrs. 1. Appearance : No damage 2. Inductance : Within 20% of initial value. No disconnection or short circuit. Temperature : -255C Time : 50012 hours Measure at room temperature after placing for 2 to 3 hrs. Conditions of 1 cycle.
Step 1 2 3 4 Temperature (C) -253 Room Temperature +853 Room Temperature Times (min.) 303 Within 3 303 Within 3
Total : 5 cycles Measure at room temperature after placing for 2 to 3 hrs. Humidity Resistance 1. Appearance : No damage 2. Inductance : Within 20% of initial value. No disconnection or short circuit. Temperature : 405C Humidity : 90% to 95% Applied Current : Rated Curent Time : 50012 hours Measure at room temperature after placing for 2 to 3 hrs.
NOTE : Specifications subject to change without notice. Please check our website for latest information.
12.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
SMD POWER INDUCTORS
7. SOLDERIND AND MOUNTING : 7-1. Recommended PC Board Pattern
12.6 7.0
SDC1205 SERIES
7-2. Soldering Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. Our terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. 7-2.1 Solder Re-flow : Recommended temperature profiles for re-flow soldering in Figure 1. 7-2.2 Soldering Iron (Figure 2) : Products attachment with soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. Note : a) Preheat circuit and products to 150C. b) 280C tip temperature (max) c) Never contact the ceramic with the iron tip d) 1.0mm tip diameter (max) e) Use a 20 watt soldering iron with tip diameter of 1.0mm f) Limit soldering time to 3 secs.
Preheating TEMPERATURE C
250~260 230 180 150 60~120s
Soldering
5.4
TEMPERATURE C
10s max.
Natural cooling
Preheating
280 260 150
Soldering
Natural cooling
30~60s
Over 1min.
Gradual Cooling Within 3secs.
Figure 1. Re-flow Soldering
Figure 2. Iron Soldering
NOTE : Specifications subject to change without notice. Please check our website for latest information.
12.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
SMD POWER INDUCTORS
8. PACKAGING INFORMATION : 8-1. Tape and Reel Dimension
SDC1205 SERIES
COVER TAPE
2.00.5 D B OC A
EMBOSSED CARRIER
220
220
220
220
220
Type 13" x 24mm
A(mm) 24.00.1
B(mm) 1001
C(mm) 130.5
D(mm) 330
8-3. Packaging Quantity
Size Chip / Reel Reel Style
SDC1205 500 13" x 24mm
NOTE : Specifications subject to change without notice. Please check our website for latest information.
12.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5

▲Up To Search▲

Price & Availability of SDC1205-1R3YF

	To Download SDC1205-1R3YF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .